Header Ads Widget

[MAN] snmpd

Content-type: text/html; charset=UTF-8 Man page of SNMPD.INTERNAL

SNMPD.INTERNAL

Section: Net-SNMP (5)
Updated: 06 Dec 2005
Index Return to Main Contents
 

NAME

snmpd.internal - internal configuration of the Net-SNMP agent  

DESCRIPTION

The snmpd.conf(5) man page defines the syntax and behaviour of the main configuration directives that can be used to control the operation of the Net-SNMP agent, and the management information it provides.

However there are several other configuration directives (many of which, though not all, start with a leading underscore) that are recognised by the agent. These are typically used to retain configuration across agent restarts, and are not intended for direct user access. This man page list these directives, giving a brief indication of where they are used. For full details - see the relevant source files. If you can't follow that source, you probably shouldn't be fiddling with these directives!  

AGENT BEHAVIOUR

quit
 

ACCESS CONTROL

 

VACM Configuration

vacmView / vacmGroup / vacmAccess
These directives are used to retain dynamically configured access control settings.
 

SYSTEM INFORMATION

 

System Group

setSerialNo
This directive is used to implement the advisory lock object snmpSetSerialNo.
psyslocation / psyscontact / psysname
These directives are used to retain dynamically configured system settings. They will be overridden by the corresponding sysLocation, sysContact and sysName directives.
 

ACTIVE MONITORING

 

Notification Handling

pauthtrapenable
This directive is used to retain the dynamically configured setting of whether the agent should generate authenticationFailure traps. It will be overridden by the corresponding authtrapenable directive.
snmpNotify*Table
targetAddr / targetParams
These directives are used to retain dynamically configured notification destination settings.
 

DisMan Event MIB

_mteE*Table, _mteOTable, _mteT*Table
These directives are used to retain dynamically configured event, object and monitor trigger settings.
mteObjectsTable / mteTriggerTable
These directives are for compatibility with the previous disman/event-mib implementation.
 

DisMan Schedule MIB

_schedTable
This directive is used to retain dynamically configured scheduled events.
 

EXTENDING AGENT FUNCTIONALITY

 

Arbitrary Extension Commands

extend-sh
exec2 / sh2 / execFix2
These directives were defined by analogy with equivalent directives in the previous ucd-snmp/extensible implementation. They are deprecated, and should not be used.
 

FILES

/etc/snmp/snmpd.conf  

SEE ALSO

snmpconf(1), snmpd.conf(5), snmp.conf(5), snmp_config(5), snmpd(8), EXAMPLE.conf, netsnmp_config_api(3).


 

Index

NAME
DESCRIPTION
AGENT BEHAVIOUR
ACCESS CONTROL
VACM Configuration
SYSTEM INFORMATION
System Group
ACTIVE MONITORING
Notification Handling
DisMan Event MIB
DisMan Schedule MIB
EXTENDING AGENT FUNCTIONALITY
Arbitrary Extension Commands
FILES
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 04:45:54 GMT, September 16, 2022 Content-type: text/html; charset=UTF-8 Man page of SNMPD.EXAMPLES

SNMPD.EXAMPLES

Section: Net-SNMP (5)
Updated: 13 Oct 2006
Index Return to Main Contents
 

NAME

snmpd.examples - example configuration for the Net-SNMP agent  

DESCRIPTION

The snmpd.conf(5) man page defines the syntax and behaviour of the various configuration directives that can be used to control the operation of the Net-SNMP agent, and the management information it provides.

This companion man page illustrates these directives, showing some practical examples of how they might be used.  

AGENT BEHAVIOUR

 

Listening addresses

The default agent behaviour (listing on the standard SNMP UDP port on all interfaces) is equivalent to the directive:
agentaddress udp:161
or simply
agentaddress 161
The agent can be configured to only accept requests sent to the local loopback interface (again listening on the SNMP UDP port), using:
agentaddress localhost:161 # (udp implicit)
or
agentaddress 127.0.0.1 # (udp and standard port implicit)
It can be configured to accept both UDP and TCP requests (over both IPv4 and IPv6), using:
agentaddress udp:161,tcp:161,udp6:161,tcp6:161
Other combinations are also valid.  

Run-time privileges

The agent can be configured to relinquish any privileged access once it has opened the initial listening ports. Given a suitable "snmp" group (defined in /etc/group), this could be done using the directives:
agentuser  nobody
agentgroup snmp
A similar effect could be achieved using numeric UID and/or GID values:
agentuser  #10
agentgroup #10
 

SNMPv3 Configuration

Rather than being generated pseudo-randomly, the engine ID for the agent could be calculated based on the MAC address of the second network interface (eth1), using the directives:
engineIDType 3 engineIDNic eth1
or it could be calculated from the (first) IP address, using:
engineIDType 1
or it could be specified explicitly, using:
engineID "XXX - WHAT FORMAT"
 

ACCESS CONTROL

 

SNMPv3 Users

The following directives will create three users, all using exactly the same authentication and encryption settings:
createUser me     MD5 "single pass phrase"
createUser myself MD5 "single pass phrase" DES
createUser andI   MD5 "single pass phrase" DES "single pass phrase"
Note that this defines three distinct users, who could be granted different levels of access. Changing the passphrase for any one of these would not affect the other two.

Separate pass phrases can be specified for authentication and encryption:

createUser onering SHA "to rule them all" AES "to bind them"
Remember that these createUser directives should be defined in the /var/lib/snmp/snmpd.conf file, rather than the usual location.  

Traditional Access Control

The SNMPv3 users defined above can be granted access to the full MIB tree using the directives:
rouser me
rwuser onering
Or selective access to individual subtrees using:
rouser myself   .1.3.6.1.2
rwuser andI     system

Note that a combination repeating the same user, such as:

rouser onering
rwuser onering
should not be used. This would configure the user onering with read-only access (and ignore the rwuser entry altogether). The same holds for the community-based directives.

The directives:

rocommunity public
rwcommunity private
would define the commonly-expected read and write community strings for SNMPv1 and SNMPv2c requests. This behaviour is not configured by default, and would need to be set up explicitly.
Note:
It would also be a very good idea to change private to something a little less predictable!

A slightly less vulnerable configuration might restrict what information could be retrieved:

rocommunity public default system
or the management systems that settings could be manipulated from:
rwcommunity private 10.10.10.0/24
or a combination of the two.  

VACM Configuration

This last pair of settings are equivalent to the full VACM definitions:
#         sec.name  source        community
com2sec   public    default       public
com2sec   mynet     10.10.10.0/24 private
com2sec6  mynet     fec0::/64     private

#                  sec.model  sec.name
group  worldGroup  v1         public
group  worldGroup  v2c        public
group  myGroup     v1         mynet
group  myGroup     v2c        mynet

#              incl/excl   subtree     [mask]
view   all     included    .1
view   sysView included    system

#              context model level   prefix  read    write  notify (unused)
access  worldGroup  ""  any  noauth  exact   system  none   none
access  myGroup     ""  any  noauth  exact   all     all    none

There are several points to note in this example:

The group directives must be repeated for both SNMPv1 and SNMPv2c requests.

The com2sec security name is distinct from the community string that is mapped to it. They can be the same ("public") or different ("mynet"/"private") - but what appears in the group directive is the security name, regardless of the original community string.

Both of the view directives are defining simple OID subtrees, so neither of these require an explicit mask. The same holds for the "combined subtree2 view defined below. In fact, a mask field is only needed when defining row slices across a table (or similar views), and can almost always be omitted.

In general, it is advisible not to mix traditional and VACM-based access configuration settings, as these can sometimes interfere with each other in unexpected ways. Choose a particular style of access configuration, and stick to it.  

Typed-View Configuration

A similar configuration could also be configured as follows:
view   sys2View included    system
view   sys2View included    .1.3.6.1.2.1.25.1

authcommunity read       public  default      -v sys2View
authcommunity read,write private 10.10.10.0/8

This mechanism allows multi-subtree (or other non-simple) views to be used with the one-line rocommunity style of configuration.

It would also support configuring "write-only" access, should this be required.  

SYSTEM INFORMATION

 

System Group

The full contents of the 'system' group (with the exception of sysUpTime) can be explicitly configured using:
# Override 'uname -a' and hardcoded system OID - inherently read-only values
sysDescr     Universal Turing Machine mk I
sysObjectID  .1.3.6.1.4.1.8072.3.2.1066

# Override default values from 'configure' - makes these objects read-only
sysContact   Alan.Turing@pre-cs.man.ac.uk
sysName      tortoise.turing.com
sysLocation  An idea in the mind of AT

# Standard end-host behaviour
sysServices  72
 

Host Resources Group

The list of devices probed for potential inclusion in the hrDiskStorageTable (and hrDeviceTable) can be amended using any of the following directives:
ignoredisk /dev/rdsk/c0t2d0
which prevents the device /dev/rdsk/c0t2d0 from being scanned,
ignoredisk /dev/rdsk/c0t[!6]d0
ignoredisk /dev/rdsk/c0t[0-57-9a-f]d0
either of which prevents all devices /dev/rdsk/c0tXd0 (except .../c0t6d0) from being scanned,
ignoredisk /dev/rdsk/c1*
which prevents all devices whose device names start with /dev/rdsk/c1 from being scanned, or
ignoredisk /dev/rdsk/c?t0d0
which prevents all devices /dev/rdsk/cXt0d0 (where 'X' is any single character) from being scanned.  

Process Monitoring

The list of services running on a system can be monitored (and provision made for correcting any problems), using:
# At least one web server process must be running at all times
proc    httpd
procfix httpd  /etc/rc.d/init.d/httpd restart

# There should never be more than 10 mail processes running
#    (more implies a probable mail storm, so shut down the mail system)
proc    sendmail   10
procfix sendmail  /etc/rc.d/init.d/sendmail stop

# There should be a single network management agent running
#   ("There can be only one")
proc    snmpd    1  1
Also see the "DisMan Event MIB" section later on.  

Disk Usage Monitoring

The state of disk storage can be monitored using:
includeAllDisks 10%
disk /var 20%
disk /usr  3%
#  Keep 100 MB free for crash dumps
disk /mnt/crash  100000
 

System Load Monitoring

A simple check for an overloaded system might be:
load 10
A more refined check (to allow brief periods of heavy use, but recognise sustained medium-heavy load) might be:
load 30 10 5
 

Log File Monitoring

TODO
file FILE [MAXSIZE]
logmatch NAME PATH CYCLETIME REGEX
 

ACTIVE MONITORING

 

Notification Handling

Configuring the agent to report invalid access attempts might be done by:
authtrapenable 1
trapcommunity  public
trap2sink      localhost
Alternatively, the second and third directives could be combined (and an acknowledgement requested) using:
informsink localhost public
A configuration with repeated sink destinations, such as:
trapsink       localhost
trap2sink      localhost
informsink     localhost
should NOT be used, as this will cause multiple copies of each trap to be sent to the same trap receiver.

TODO - discuss SNMPv3 traps

trapsess snmpv3 options localhost:162

TODO - mention trapd access configuration

 

DisMan Event MIB

The simplest configuration for active self-monitoring of the agent, by the agent, for the agent, is probably:
# Set up the credentials to retrieve monitored values
createUser    _internal MD5 "the first sign of madness"
iquerySecName _internal
rouser        _internal

# Active the standard monitoring entries
defaultMonitors         yes
linkUpDownNotifications yes

# If there's a problem, then tell someone!
trap2sink localhost

The first block sets up a suitable user for retrieving the information to by monitored, while the following pair of directives activates various built-in monitoring entries.

Note that the DisMan directives are not themselves sufficient to actively report problems - there also needs to be a suitable destination configured to actually send the resulting notifications to.

A more detailed monitor example is given by:

monitor -u me -o hrSWRunName "high process memory" hrSWRunPerfMem > 10000

This defines an explicit boolean monitor entry, looking for any process using more than 10MB of active memory. Such processes will be reported using the (standard) DisMan trap mteTriggerFired, but adding an extra (wildcarded) varbind hrSWRunName.

This entry also specifies an explicit user (me, as defined earlier) for retrieving the monitored values, and building the trap.

Objects that could potentially fluctuate around the specified level are better monitored using a threshold monitor entry:

monitor -D -r 10 "network traffic" ifInOctets 1000000 5000000

This will send a mteTriggerRising trap whenever the incoming traffic rises above (roughly) 500 kB/s on any network interface, and a corresponding mteTriggerFalling trap when it falls below 100 kB/s again.

Note that this monitors the deltas between successive samples (-D) rather than the actual sample values themselves. The same effect could be obtained using:

monitor -r 10 "network traffic" ifInOctets - - 1000000 5000000

The linkUpDownNotifications directive above is broadly equivalent to:

notificationEvent  linkUpTrap    linkUp   ifIndex ifAdminStatus ifOperStatus
notificationEvent  linkDownTrap  linkDown ifIndex ifAdminStatus ifOperStatus

monitor  -r 60 -e linkUpTrap   "Generate linkUp"   ifOperStatus != 2
monitor  -r 60 -e linkDownTrap "Generate linkDown" ifOperStatus == 2

This defines the traps to be sent (using notificationEvent), and explicitly references the relevant notification in the corresponding monitor entry (rather than using the default DisMan traps).

The defaultMonitors directive above is equivalent to a series of (boolean) monitor entries:

monitor -o prNames      -o prErrMessage  "procTable" prErrorFlag   != 0
monitor -o memErrorName -o memSwapErrorMsg "memory"  memSwapError  != 0
monitor -o extNames     -o extOutput     "extTable"  extResult     != 0
monitor -o dskPath      -o dskErrorMsg   "dskTable"  dskErrorFlag  != 0
monitor -o laNames      -o laErrMessage  "laTable"   laErrorFlag   != 0
monitor -o fileName     -o fileErrorMsg  "fileTable" fileErrorFlag != 0
and will send a trap whenever any of these entries indicate a problem.

An alternative approach would be to automatically invoke the corresponding "fix" action:

setEvent   prFixIt  prErrFix = 1
monitor -e prFixIt "procTable" prErrorFlag   != 0
(and similarly for any of the other defaultMonitor entries).  

DisMan Schedule MIB

The agent could be configured to reload its configuration once an hour, using:
repeat 3600 versionUpdateConfig.0 = 1

Alternatively this could be configured to be run at specific times of day (perhaps following rotation of the logs):

cron 10 0 * * * versionUpdateConfig.0 = 1

The one-shot style of scheduling is rather less common, but the secret SNMP virus could be activated on the next occurance of Friday 13th using:

at 13 13 13 * 5 snmpVirus.0 = 1
 

EXTENDING AGENT FUNCTIONALITY

 

Arbitrary Extension Commands

Old Style
exec [MIBOID] NAME PROG ARGS"
sh   [MIBOID] NAME PROG ARGS"
execfix NAME PROG ARGS"
New Style
extend [MIBOID] NAME PROG ARGS"
extendfix [MIBOID] NAME PROG ARGS"
 

MIB-Specific Extension Commands

One-Shot
"pass [-p priority] MIBOID PROG"
Persistent
"pass_persist [-p priority] MIBOID PROG"
 

Embedded Perl Support

If embedded perl support is enabled in the agent, the default initialisation is equivalent to the directives:
disablePerl  false
perlInitFile /usr/share/snmp/snmp_perl.pl
The main mechanism for defining embedded perl scripts is the perl directive. A very simple (if somewhat pointless) MIB handler could be registered using:
perl use Data::Dumper;
perl sub myroutine  { print "got called: ",Dumper(@_),"\n"; }
perl $agent->register('mylink', '.1.3.6.1.8765', \&myroutine);

This relies on the $agent object, defined in the example snmp_perl.pl file.

A more realistic MIB handler might be:

XXX - WHAT ???
Alternatively, this code could be stored in an external file, and loaded using:
perl 'do /usr/share/snmp/perl_example.pl';
 

Dynamically Loadable Modules

TODO
dlmod NAME PATH"
 

Proxy Support

A configuration for acting as a simple proxy for two other SNMP agents (running on remote systems) might be:
com2sec -Cn rem1context  rem1user default  remotehost1
com2sec -Cn rem2context  rem2user default  remotehost2

proxy -Cn rem1context  -v 1 -c public  remotehost1  .1.3
proxy -Cn rem2context  -v 1 -c public  remotehost2  .1.3
(plus suitable access control entries).

The same proxy directives would also work with (incoming) SNMPv3 requests, which can specify a context directly. It would probably be more sensible to use contexts of remotehost1 and remotehost2 - the names above were chosen to indicate how these directives work together.

Note that the administrative settings for the proxied request are specified explicitly, and are independent of the settings from the incoming request.

An alternative use for the proxy directive is to pass part of the OID tree to another agent (either on a remote host or listening on a different port on the same system), while handling the rest internally:

proxy -v 1 -c public localhost:6161 .1.3.6.1.4.1.99
This mechanism can be used to link together two separate SNMP agents.

A less usual approach is to map one subtree into a different area of the overall MIB tree (either locally or on a remote system):

# uses SNMPv3 to access the MIB tree .1.3.6.1.2.1.1 on 'remotehost'
# and maps this to the local tree .1.3.6.1.3.10
proxy -v 3 -l noAuthNoPriv -u user remotehost .1.3.6.1.3.10 .1.3.6.1.2.1.1
 

SMUX Sub-Agents

smuxsocket 127.0.0.1
smuxpeer .1.3.6.1.2.1.14 ospf_pass
 

AgentX Sub-Agents

The Net-SNMP agent could be configured to operate as an AgentX master agent (listening on a non-standard named socket, and running using the access privileges defined earlier), using:
master agentx
agentXSocket /tmp/agentx/master
agentXPerms  0660 0550 nobody snmp
A sub-agent wishing to connect to this master agent would need the same agentXSocket directive, or the equivalent code:
netsnmp_ds_set_string(NETSNMP_DS_APPLICATION_ID, NETSNMP_DS_AGENT_X_SOCKET, 
                      "/tmp/agentx/master");

A loopback networked AgentX configuration could be set up using:

agentXSocket   tcp:localhost:705
agentXTimeout  5
agentXRetries  2
on the master side, and:
agentXSocket   tcp:localhost:705
agentXTimeout  10
agentXRetries  1
agentXPingInterval 600
on the client.

Note that the timeout and retry settings can be asymmetric for the two directions, and the sub-agent can poll the master agent at regular intervals (600s = every 10 minutes), to ensure the connection is still working.  

OTHER CONFIGURATION

override sysDescr.0 octet_str "my own sysDescr"
injectHandler stash_cache NAME table_iterator
 

FILES

/etc/snmp/snmpd.conf  

SEE ALSO

snmpconf(1), snmpd.conf(5), snmp.conf(5), snmp_config(5), snmpd(8), EXAMPLE.conf, netsnmp_config_api(3).


 

Index

NAME
DESCRIPTION
AGENT BEHAVIOUR
Listening addresses
Run-time privileges
SNMPv3 Configuration
ACCESS CONTROL
SNMPv3 Users
Traditional Access Control
VACM Configuration
Typed-View Configuration
SYSTEM INFORMATION
System Group
Host Resources Group
Process Monitoring
Disk Usage Monitoring
System Load Monitoring
Log File Monitoring
ACTIVE MONITORING
Notification Handling
DisMan Event MIB
DisMan Schedule MIB
EXTENDING AGENT FUNCTIONALITY
Arbitrary Extension Commands
MIB-Specific Extension Commands
Embedded Perl Support
Dynamically Loadable Modules
Proxy Support
SMUX Sub-Agents
AgentX Sub-Agents
OTHER CONFIGURATION
FILES
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 04:45:56 GMT, September 16, 2022

댓글 쓰기

0 댓글