Content-type: text/html; charset=UTF-8
RTNETLINK
Section: Linux Programmer's Manual (3)Updated: 2014-09-06
Index Return to Main Contents
NAME
rtnetlink - macros to manipulate rtnetlink messagesSYNOPSIS
#include <asm/types.h>#include <linux/netlink.h>
#include <linux/rtnetlink.h>
#include <sys/socket.h>
rtnetlink_socket = socket(AF_NETLINK, int socket_type, NETLINK_ROUTE);
int RTA_OK(struct rtattr *rta, int rtabuflen);
void *RTA_DATA(struct rtattr *rta);
unsigned int RTA_PAYLOAD(struct rtattr *rta);
struct rtattr *RTA_NEXT(struct rtattr *rta, unsigned int rtabuflen);
unsigned int RTA_LENGTH(unsigned int length);
unsigned int RTA_SPACE(unsigned int length);
DESCRIPTION
All rtnetlink(7) messages consist of a netlink(7) message header and appended attributes. The attributes should be manipulated only using the macros provided here.RTA_OK(rta, attrlen) returns true if rta points to a valid routing attribute; attrlen is the running length of the attribute buffer. When not true then you must assume there are no more attributes in the message, even if attrlen is nonzero.
RTA_DATA(rta) returns a pointer to the start of this attribute's data.
RTA_PAYLOAD(rta) returns the length of this attribute's data.
RTA_NEXT(rta, attrlen) gets the next attribute after rta. Calling this macro will update attrlen. You should use RTA_OK to check the validity of the returned pointer.
RTA_LENGTH(len) returns the length which is required for len bytes of data plus the header.
RTA_SPACE(len) returns the amount of space which will be needed in a message with len bytes of data.
CONFORMING TO
These macros are nonstandard Linux extensions.BUGS
This manual page is incomplete.EXAMPLE
Creating a rtnetlink message to set the MTU of a device:#include <linux/rtnetlink.h>
...
struct {
struct nlmsghdr nh;
struct ifinfomsg if;
char attrbuf[512];
} req;
struct rtattr *rta; unsigned int mtu = 1000;
int rtnetlink_sk = socket(AF_NETLINK, SOCK_DGRAM, NETLINK_ROUTE);
memset(&req, 0, sizeof(req));
req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg));
req.nh.nlmsg_flags = NLM_F_REQUEST;
req.nh.nlmsg_type = RTM_NEWLINK;
req.if.ifi_family = AF_UNSPEC;
req.if.ifi_index = INTERFACE_INDEX;
req.if.ifi_change = 0xffffffff; /* ??? */
rta = (struct rtattr *)(((char *) &req) +
NLMSG_ALIGN(req.nh.nlmsg_len));
rta->rta_type = IFLA_MTU;
rta->rta_len = RTA_LENGTH(sizeof(unsigned int));
req.nh.nlmsg_len = NLMSG_ALIGN(req.nh.nlmsg_len) +
RTA_LENGTH(sizeof(mtu));
memcpy(RTA_DATA(rta), &mtu, sizeof(mtu));
send(rtnetlink_sk, &req, req.nh.nlmsg_len, 0);
SEE ALSO
netlink(3), netlink(7), rtnetlink(7)COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Index
This document was created by man2html, using the manual pages.
Time: 04:45:52 GMT, September 16, 2022 Content-type: text/html; charset=UTF-8
RTNETLINK
Section: Linux Programmer's Manual (7)Updated: 2017-09-15
Index Return to Main Contents
NAME
rtnetlink - Linux IPv4 routing socketSYNOPSIS
#include <asm/types.h>#include <linux/if_link.h>
#include <linux/netlink.h>
#include <linux/rtnetlink.h>
#include <sys/socket.h>
rtnetlink_socket = socket(AF_NETLINK, int socket_type, NETLINK_ROUTE);
DESCRIPTION
Rtnetlink allows the kernel's routing tables to be read and altered. It is used within the kernel to communicate between various subsystems, though this usage is not documented here, and for communication with user-space programs. Network routes, IP addresses, link parameters, neighbor setups, queueing disciplines, traffic classes and packet classifiers may all be controlled through NETLINK_ROUTE sockets. It is based on netlink messages; see netlink(7) for more information.Routing attributes
Some rtnetlink messages have optional attributes after the initial header:
struct rtattr {
unsigned short rta_len; /* Length of option */
unsigned short rta_type; /* Type of option */
/* Data follows */
};
These attributes should be manipulated using only the RTA_* macros or libnetlink, see rtnetlink(3).
Messages
Rtnetlink consists of these message types (in addition to standard netlink messages):- RTM_NEWLINK, RTM_DELLINK, RTM_GETLINK
- Create, remove or get information about a specific network interface. These messages contain an ifinfomsg structure followed by a series of rtattr structures.
-
struct ifinfomsg {
unsigned char ifi_family; /* AF_UNSPEC */
unsigned short ifi_type; /* Device type */
int ifi_index; /* Interface index */
unsigned int ifi_flags; /* Device flags */
unsigned int ifi_change; /* change mask */ }; -
ifi_flags
contains the device flags, see
netdevice(7);
ifi_index
is the unique interface index
(since Linux 3.7, it is possible to feed a nonzero value with the
RTM_NEWLINK
message, thus creating a link with the given
ifindex);
ifi_change
is reserved for future use and should be always set to 0xFFFFFFFF.
Routing attributes rta_type value type description IFLA_UNSPEC - unspecified. IFLA_ADDRESS hardware address interface L2 address IFLA_BROADCAST hardware address L2 broadcast address. IFLA_IFNAME asciiz string Device name. IFLA_MTU unsigned int MTU of the device. IFLA_LINK int Link type. IFLA_QDISC asciiz string Queueing discipline. IFLA_STATS see below Interface Statistics.
The value type for IFLA_STATS is struct rtnl_link_stats (struct net_device_stats in Linux 2.4 and earlier).
- RTM_NEWADDR, RTM_DELADDR, RTM_GETADDR
- Add, remove or receive information about an IP address associated with an interface. In Linux 2.2, an interface can carry multiple IP addresses, this replaces the alias device concept in 2.0. In Linux 2.2, these messages support IPv4 and IPv6 addresses. They contain an ifaddrmsg structure, optionally followed by rtattr routing attributes.
-
struct ifaddrmsg {
unsigned char ifa_family; /* Address type */
unsigned char ifa_prefixlen; /* Prefixlength of address */
unsigned char ifa_flags; /* Address flags */
unsigned char ifa_scope; /* Address scope */
int ifa_index; /* Interface index */ }; -
ifa_family
is the address family type (currently
AF_INET
or
AF_INET6),
ifa_prefixlen
is the length of the address mask of the address if defined for the
family (like for IPv4),
ifa_scope
is the address scope,
ifa_index
is the interface index of the interface the address is associated with.
ifa_flags
is a flag word of
IFA_F_SECONDARY
for secondary address (old alias interface),
IFA_F_PERMANENT
for a permanent address set by the user and other undocumented flags.
Attributes rta_type value type description IFA_UNSPEC - unspecified. IFA_ADDRESS raw protocol address interface address IFA_LOCAL raw protocol address local address IFA_LABEL asciiz string name of the interface IFA_BROADCAST raw protocol address broadcast address. IFA_ANYCAST raw protocol address anycast address IFA_CACHEINFO struct ifa_cacheinfo Address information. - RTM_NEWROUTE, RTM_DELROUTE, RTM_GETROUTE
- Create, remove or receive information about a network route. These messages contain an rtmsg structure with an optional sequence of rtattr structures following. For RTM_GETROUTE, setting rtm_dst_len and rtm_src_len to 0 means you get all entries for the specified routing table. For the other fields, except rtm_table and rtm_protocol, 0 is the wildcard.
-
struct rtmsg {
unsigned char rtm_family; /* Address family of route */
unsigned char rtm_dst_len; /* Length of destination */
unsigned char rtm_src_len; /* Length of source */
unsigned char rtm_tos; /* TOS filter */
unsigned char rtm_table; /* Routing table ID */
unsigned char rtm_protocol; /* Routing protocol; see below */
unsigned char rtm_scope; /* See below */
unsigned char rtm_type; /* See below */
unsigned int rtm_flags; };rtm_type Route type RTN_UNSPEC unknown route RTN_UNICAST a gateway or direct route RTN_LOCAL a local interface route RTN_BROADCAST a local broadcast route (sent as a broadcast) RTN_ANYCAST a local broadcast route (sent as a unicast) RTN_MULTICAST a multicast route RTN_BLACKHOLE a packet dropping route RTN_UNREACHABLE an unreachable destination RTN_PROHIBIT a packet rejection route RTN_THROW continue routing lookup in another table RTN_NAT a network address translation rule RTN_XRESOLVE refer to an external resolver (not implemented) rtm_protocol Route origin. RTPROT_UNSPEC unknown RTPROT_REDIRECT by an ICMP redirect (currently unused) RTPROT_KERNEL by the kernel RTPROT_BOOT during boot RTPROT_STATIC by the administrator Values larger than RTPROT_STATIC are not interpreted by the kernel, they are just for user information. They may be used to tag the source of a routing information or to distinguish between multiple routing daemons. See <linux/rtnetlink.h> for the routing daemon identifiers which are already assigned.
-
rtm_scope
is the distance to the destination:
RT_SCOPE_UNIVERSE global route RT_SCOPE_SITE interior route in the local autonomous system RT_SCOPE_LINK route on this link RT_SCOPE_HOST route on the local host RT_SCOPE_NOWHERE destination doesn't exist The values between RT_SCOPE_UNIVERSE and RT_SCOPE_SITE are available to the user.
-
The
rtm_flags
have the following meanings:
RTM_F_NOTIFY if the route changes, notify the user via rtnetlink RTM_F_CLONED route is cloned from another route RTM_F_EQUALIZE a multipath equalizer (not yet implemented) rtm_table specifies the routing table
RT_TABLE_UNSPEC an unspecified routing table RT_TABLE_DEFAULT the default table RT_TABLE_MAIN the main table RT_TABLE_LOCAL the local table The user may assign arbitrary values between RT_TABLE_UNSPEC and RT_TABLE_DEFAULT.
Attributes rta_type value type description RTA_UNSPEC - ignored. RTA_DST protocol address Route destination address. RTA_SRC protocol address Route source address. RTA_IIF int Input interface index. RTA_OIF int Output interface index. RTA_GATEWAY protocol address The gateway of the route RTA_PRIORITY int Priority of route. RTA_PREFSRC RTA_METRICS int Route metric RTA_MULTIPATH RTA_PROTOINFO RTA_FLOW RTA_CACHEINFO Fill these values in!
- RTM_NEWNEIGH, RTM_DELNEIGH, RTM_GETNEIGH
- Add, remove or receive information about a neighbor table entry (e.g., an ARP entry). The message contains an ndmsg structure.
-
struct ndmsg {
unsigned char ndm_family;
int ndm_ifindex; /* Interface index */
__u16 ndm_state; /* State */
__u8 ndm_flags; /* Flags */
__u8 ndm_type; };struct nda_cacheinfo {
__u32 ndm_confirmed;
__u32 ndm_used;
__u32 ndm_updated;
__u32 ndm_refcnt; }; -
ndm_state
is a bit mask of the following states:
NUD_INCOMPLETE a currently resolving cache entry NUD_REACHABLE a confirmed working cache entry NUD_STALE an expired cache entry NUD_DELAY an entry waiting for a timer NUD_PROBE a cache entry that is currently reprobed NUD_FAILED an invalid cache entry NUD_NOARP a device with no destination cache NUD_PERMANENT a static entry Valid ndm_flags are:
NTF_PROXY a proxy arp entry NTF_ROUTER an IPv6 router The rtattr struct has the following meanings for the rta_type field:
NDA_UNSPEC unknown type NDA_DST a neighbor cache n/w layer destination address NDA_LLADDR a neighbor cache link layer address NDA_CACHEINFO cache statistics. If the rta_type field is NDA_CACHEINFO, then a struct nda_cacheinfo header follows
- RTM_NEWRULE, RTM_DELRULE, RTM_GETRULE
- Add, delete or retrieve a routing rule. Carries a struct rtmsg
- RTM_NEWQDISC, RTM_DELQDISC, RTM_GETQDISC
- Add, remove or get a queueing discipline. The message contains a struct tcmsg and may be followed by a series of attributes.
-
struct tcmsg {
unsigned char tcm_family;
int tcm_ifindex; /* interface index */
__u32 tcm_handle; /* Qdisc handle */
__u32 tcm_parent; /* Parent qdisc */
__u32 tcm_info; };Attributes rta_type value type Description TCA_UNSPEC - unspecified TCA_KIND asciiz string Name of queueing discipline TCA_OPTIONS byte sequence Qdisc-specific options follow TCA_STATS struct tc_stats Qdisc statistics. TCA_XSTATS qdisc-specific Module-specific statistics. TCA_RATE struct tc_estimator Rate limit. In addition, various other qdisc-module-specific attributes are allowed. For more information see the appropriate include files.
- RTM_NEWTCLASS, RTM_DELTCLASS, RTM_GETTCLASS
- Add, remove or get a traffic class. These messages contain a struct tcmsg as described above.
- RTM_NEWTFILTER, RTM_DELTFILTER, RTM_GETTFILTER
- Add, remove or receive information about a traffic filter. These messages contain a struct tcmsg as described above.
VERSIONS
rtnetlink is a new feature of Linux 2.2.BUGS
This manual page is incomplete.SEE ALSO
cmsg(3), rtnetlink(3), ip(7), netlink(7)COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.
Index
This document was created by man2html, using the manual pages.
Time: 04:45:57 GMT, September 16, 2022
![[MAN] dpkg-shlibdeps](https://blogger.googleusercontent.com/img/a/AVvXsEitfznRjvReRJUdd4v4tRKeHPIiY6C4DkbiRpW4pB5OZ0x9kOjfQtTv9Fi2i8IjVLmzastSRdRDORdabWA1dlnhBibT-DKKkYqYuonPtC15h6_o6d10zPAjZ9qQkn4NfICnrEMX-4XvPMJpiSKALSp7wLwGfP05yapMjWQCy8wvQRVQyUokHrQllrbd=w72-h72-p-k-no-nu)
0 댓글