Header Ads Widget

[MAN] dlopen

Content-type: text/html; charset=UTF-8 Man page of DLOPEN

DLOPEN

Section: Linux Programmer's Manual (3)
Updated: 2017-09-15
Index Return to Main Contents
 

NAME

dlclose, dlopen, dlmopen - open and close a shared object  

SYNOPSIS

#include <dlfcn.h>

void *dlopen(const char *filename, int flags);

int dlclose(void *handle);

#define _GNU_SOURCE
#include <dlfcn.h>

void *dlmopen (Lmid_t lmid, const char *filename, int flags);

Link with -ldl.  

DESCRIPTION

 

dlopen()

The function dlopen() loads the dynamic shared object (shared library) file named by the null-terminated string filename and returns an opaque "handle" for the loaded object. This handle is employed with other functions in the dlopen API, such as dlsym(3), dladdr(3), dlinfo(3), and dlclose().

If filename is NULL, then the returned handle is for the main program. If filename contains a slash ("/"), then it is interpreted as a (relative or absolute) pathname. Otherwise, the dynamic linker searches for the object as follows (see ld.so(8) for further details):

o
(ELF only) If the executable file for the calling program contains a DT_RPATH tag, and does not contain a DT_RUNPATH tag, then the directories listed in the DT_RPATH tag are searched.
o
If, at the time that the program was started, the environment variable LD_LIBRARY_PATH was defined to contain a colon-separated list of directories, then these are searched. (As a security measure, this variable is ignored for set-user-ID and set-group-ID programs.)
o
(ELF only) If the executable file for the calling program contains a DT_RUNPATH tag, then the directories listed in that tag are searched.
o
The cache file /etc/ld.so.cache (maintained by ldconfig(8)) is checked to see whether it contains an entry for filename.
o
The directories /lib and /usr/lib are searched (in that order).

If the object specified by filename has dependencies on other shared objects, then these are also automatically loaded by the dynamic linker using the same rules. (This process may occur recursively, if those objects in turn have dependencies, and so on.)

One of the following two values must be included in flags:

RTLD_LAZY
Perform lazy binding. Resolve symbols only as the code that references them is executed. If the symbol is never referenced, then it is never resolved. (Lazy binding is performed only for function references; references to variables are always immediately bound when the shared object is loaded.) Since glibc 2.1.1, this flag is overridden by the effect of the LD_BIND_NOW environment variable.
RTLD_NOW
If this value is specified, or the environment variable LD_BIND_NOW is set to a nonempty string, all undefined symbols in the shared object are resolved before dlopen() returns. If this cannot be done, an error is returned.

Zero or more of the following values may also be ORed in flags:

RTLD_GLOBAL
The symbols defined by this shared object will be made available for symbol resolution of subsequently loaded shared objects.
RTLD_LOCAL
This is the converse of RTLD_GLOBAL, and the default if neither flag is specified. Symbols defined in this shared object are not made available to resolve references in subsequently loaded shared objects.
RTLD_NODELETE (since glibc 2.2)
Do not unload the shared object during dlclose(). Consequently, the object's static variables are not reinitialized if the object is reloaded with dlopen() at a later time.
RTLD_NOLOAD (since glibc 2.2)
Don't load the shared object. This can be used to test if the object is already resident (dlopen() returns NULL if it is not, or the object's handle if it is resident). This flag can also be used to promote the flags on a shared object that is already loaded. For example, a shared object that was previously loaded with RTLD_LOCAL can be reopened with RTLD_NOLOAD | RTLD_GLOBAL.
RTLD_DEEPBIND (since glibc 2.3.4)
Place the lookup scope of the symbols in this shared object ahead of the global scope. This means that a self-contained object will use its own symbols in preference to global symbols with the same name contained in objects that have already been loaded.

If filename is NULL, then the returned handle is for the main program. When given to dlsym(), this handle causes a search for a symbol in the main program, followed by all shared objects loaded at program startup, and then all shared objects loaded by dlopen() with the flag RTLD_GLOBAL.

External references in the shared object are resolved using the shared objects in that object's dependency list and any other objects previously opened with the RTLD_GLOBAL flag. If the executable was linked with the flag "-rdynamic" (or, synonymously, "--export-dynamic"), then the global symbols in the executable will also be used to resolve references in a dynamically loaded shared object.

If the same shared object is loaded again with dlopen(), the same object handle is returned. The dynamic linker maintains reference counts for object handles, so a dynamically loaded shared object is not deallocated until dlclose() has been called on it as many times as dlopen() has succeeded on it. Any initialization returns (see below) are called just once. However, a subsequent dlopen() call that loads the same shared object with RTLD_NOW may force symbol resolution for a shared object earlier loaded with RTLD_LAZY.

If dlopen() fails for any reason, it returns NULL.  

dlmopen()

This function performs the same task as dlopen()---the filename and flags arguments, as well as the return value, are the same, except for the differences noted below.

The dlmopen() function differs from dlopen() primarily in that it accepts an additional argument, lmid, that specifies the link-map list (also referred to as a namespace) in which the shared object should be loaded. (By comparison, dlopen() adds the dynamically loaded shared object to the same namespace as the shared object from which the dlopen() call is made.) The Lmid_t type is an opaque handle that refers to a namespace.

The lmid argument is either the ID of an existing namespace (which can be obtained using the dlinfo(3) RTLD_DI_LMID request) or one of the following special values:

LM_ID_BASE
Load the shared object in the initial namespace (i.e., the application's namespace).
LM_ID_NEWLM
Create a new namespace and load the shared object in that namespace. The object must have been correctly linked to reference all of the other shared objects that it requires, since the new namespace is initially empty.

If filename is NULL, then the only permitted value for lmid is LM_ID_BASE.  

dlclose()

The function dlclose() decrements the reference count on the dynamically loaded shared object referred to by handle. If the reference count drops to zero, then the object is unloaded. All shared objects that were automatically loaded when dlopen() was invoked on the object referred to by handle are recursively closed in the same manner.

A successful return from dlclose() does not guarantee that the symbols associated with handle are removed from the caller's address space. In addition to references resulting from explicit dlopen() calls, a shared object may have been implicitly loaded (and reference counted) because of dependencies in other shared objects. Only when all references have been released can the shared object be removed from the address space.  

RETURN VALUE

On success, dlopen() and dlmopen() return a non-NULL handle for the loaded library. On error (file could not be found, was not readable, had the wrong format, or caused errors during loading), these functions return NULL.

On success, dlclose() returns 0; on error, it returns a nonzero value.

Errors from these functions can be diagnosed using dlerror(3).  

VERSIONS

dlopen() and dlclose() are present in glibc 2.0 and later. dlmopen() first appeared in glibc 2.3.4.  

ATTRIBUTES

For an explanation of the terms used in this section, see attributes(7).
InterfaceAttributeValue
dlopen(), dlmopen(), dlclose() Thread safetyMT-Safe
 

CONFORMING TO

POSIX.1-2001 describes dlclose() and dlopen(). The dlmopen() function is a GNU extension.

The RTLD_NOLOAD, RTLD_NODELETE, and RTLD_DEEPBIND flags are GNU extensions; the first two of these flags are also present on Solaris.  

NOTES

 

dlmopen() and namespaces

A link-map list defines an isolated namespace for the resolution of symbols by the dynamic linker. Within a namespace, dependent shared objects are implicitly loaded according to the usual rules, and symbol references are likewise resolved according to the usual rules, but such resolution is confined to the definitions provided by the objects that have been (explicitly and implicitly) loaded into the namespace.

The dlmopen() function permits object-load isolation---the ability to load a shared object in a new namespace without exposing the rest of the application to the symbols made available by the new object. Note that the use of the RTLD_LOCAL flag is not sufficient for this purpose, since it prevents a shared object's symbols from being available to any other shared object. In some cases, we may want to make the symbols provided by a dynamically loaded shared object available to (a subset of) other shared objects without exposing those symbols to the entire application. This can be achieved by using a separate namespace and the RTLD_GLOBAL flag.

The dlmopen() function also can be used to provide better isolation than the RTLD_LOCAL flag. In particular, shared objects loaded with RTLD_LOCAL may be promoted to RTLD_GLOBAL if they are dependencies of another shared object loaded with RTLD_GLOBAL. Thus, RTLD_LOCAL is insufficient to isolate a loaded shared object except in the (uncommon) case where one has explicit control over all shared object dependencies.

Possible uses of dlmopen() are plugins where the author of the plugin-loading framework can't trust the plugin authors and does not wish any undefined symbols from the plugin framework to be resolved to plugin symbols. Another use is to load the same object more than once. Without the use of dlmopen(), this would require the creation of distinct copies of the shared object file. Using dlmopen(), this can be achieved by loading the same shared object file into different namespaces.

The glibc implementation supports a maximum of 16 namespaces.  

Initialization and finalization functions

Shared objects may export functions using the __attribute__((constructor)) and __attribute__((destructor)) function attributes. Constructor functions are executed before dlopen() returns, and destructor functions are executed before dlclose() returns. A shared object may export multiple constructors and destructors, and priorities can be associated with each function to determine the order in which they are executed. See the gcc info pages (under "Function attributes") for further information.

An older method of (partially) achieving the same result is via the use of two special symbols recognized by the linker: _init and _fini. If a dynamically loaded shared object exports a routine named _init(), then that code is executed after loading a shared object, before dlopen() returns. If the shared object exports a routine named _fini(), then that routine is called just before the object is unloaded. In this case, one must avoid linking against the system startup files, which contain default versions of these files; this can be done by using the gcc(1) -nostartfiles command-line option.

Use of _init and _fini is now deprecated in favor of the aforementioned constructors and destructors, which among other advantages, permit multiple initialization and finalization functions to be defined.

Since glibc 2.2.3, atexit(3) can be used to register an exit handler that is automatically called when a shared object is unloaded.  

History

These functions are part of the dlopen API, derived from SunOS.  

BUGS

As at glibc 2.24, specifying the RTLD_GLOBAL flag when calling dlmopen() generates an error. Furthermore, specifying RTLD_GLOBAL when calling dlopen() results in a program crash (SIGSEGV) if the call is made from any object loaded in a namespace other than the initial namespace.  

EXAMPLE

The program below loads the (glibc) math library, looks up the address of the cos(3) function, and prints the cosine of 2.0. The following is an example of building and running the program:

$ cc dlopen_demo.c -ldl $ ./a.out -0.416147  

Program source

#include <stdio.h> #include <stdlib.h> #include <dlfcn.h> #include <gnu/lib-names.h> /* Defines LIBM_SO (which will be a
                               string such as "libm.so.6") */ int main(void) {
    void *handle;
    double (*cosine)(double);
    char *error;


    handle = dlopen(LIBM_SO, RTLD_LAZY);
    if (!handle) {
        fprintf(stderr, "%s\n", dlerror());
        exit(EXIT_FAILURE);
    }


    dlerror();    /* Clear any existing error */


    cosine = (double (*)(double)) dlsym(handle, "cos");


    /* According to the ISO C standard, casting between function
       pointers and 'void *', as done above, produces undefined results.
       POSIX.1-2003 and POSIX.1-2008 accepted this state of affairs and
       proposed the following workaround:


           *(void **) (&cosine) = dlsym(handle, "cos");


       This (clumsy) cast conforms with the ISO C standard and will
       avoid any compiler warnings.


       The 2013 Technical Corrigendum to POSIX.1-2008 (a.k.a.
       POSIX.1-2013) improved matters by requiring that conforming
       implementations support casting 'void *' to a function pointer.
       Nevertheless, some compilers (e.g., gcc with the '-pedantic'
       option) may complain about the cast used in this program. */


    error = dlerror();
    if (error != NULL) {
        fprintf(stderr, "%s\n", error);
        exit(EXIT_FAILURE);
    }


    printf("%f\n", (*cosine)(2.0));
    dlclose(handle);
    exit(EXIT_SUCCESS); }  

SEE ALSO

ld(1), ldd(1), pldd(1), dl_iterate_phdr(3), dladdr(3), dlerror(3), dlinfo(3), dlsym(3), rtld-audit(7), ld.so(8), ldconfig(8)

gcc info pages, ld info pages  

COLOPHON

This page is part of release 4.15 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.


 

Index

NAME
SYNOPSIS
DESCRIPTION
dlopen()
dlmopen()
dlclose()
RETURN VALUE
VERSIONS
ATTRIBUTES
CONFORMING TO
NOTES
dlmopen() and namespaces
Initialization and finalization functions
History
BUGS
EXAMPLE
Program source
SEE ALSO
COLOPHON

This document was created by man2html, using the manual pages.
Time: 04:45:52 GMT, September 16, 2022

댓글 쓰기

0 댓글