APT-CACHE
Section: APT (8)Updated: 25 November 2016
Index Return to Main Contents
NAME
apt-cache - query the APT cacheSYNOPSIS
- apt-cache [-agipns] [-o=config_string] [-c=config_file] {gencaches | showpkg pkg... | showsrc pkg... | stats | dump | dumpavail | unmet | search regex... | show pkg [{=pkg_version_number | /target_release}]... | depends pkg [{=pkg_version_number | /target_release}]... | rdepends pkg [{=pkg_version_number | /target_release}]... | pkgnames [prefix] | dotty pkg [{=pkg_version_number | /target_release}]... | xvcg pkg [{=pkg_version_number | /target_release}]... | policy [pkg...] | madison pkg... | {-v | --version} | {-h | --help}}
DESCRIPTION
apt-cache
Unless the -h, or --help option is given, one of the commands below must be present.
gencaches
- gencaches creates APT's package cache. This is done implicitly by all commands needing this cache if it is missing or outdated.
showpkg pkg...
-
showpkg
displays information about the packages listed on the command line. Remaining arguments are package names. The available versions and reverse dependencies of each package listed are listed, as well as forward dependencies for each version. Forward (normal) dependencies are those packages upon which the package in question depends; reverse dependencies are those packages that depend upon the package in question. Thus, forward dependencies must be satisfied for a package, but reverse dependencies need not be. For instance,
apt-cache showpkg libreadline2
would produce output similar to the following:
-
Package: libreadline2 Versions: 2.1-12(/var/state/apt/lists/foo_Packages), Reverse Depends: libreadlineg2,libreadline2 libreadline2-altdev,libreadline2 Dependencies: 2.1-12 - libc5 (2 5.4.0-0) ncurses3.0 (0 (null)) Provides: 2.1-12 - Reverse Provides:
-
stats
-
stats
displays some statistics about the cache. No further arguments are expected. Statistics reported are:
- • Total package names is the number of package names found in the cache.
- • Normal packages is the number of regular, ordinary package names; these are packages that bear a one-to-one correspondence between their names and the names used by other packages for them in dependencies. The majority of packages fall into this category.
- • Pure virtual packages is the number of packages that exist only as a virtual package name; that is, packages only "provide" the virtual package name, and no package actually uses the name. For instance, "mail-transport-agent" in the Debian system is a pure virtual package; several packages provide "mail-transport-agent", but there is no package named "mail-transport-agent".
- • Single virtual packages is the number of packages with only one package providing a particular virtual package. For example, in the Debian system, "X11-text-viewer" is a virtual package, but only one package, xless, provides "X11-text-viewer".
- • Mixed virtual packages is the number of packages that either provide a particular virtual package or have the virtual package name as the package name. For instance, in the Debian system, "debconf" is both an actual package, and provided by the debconf-tiny package.
- • Missing is the number of package names that were referenced in a dependency but were not provided by any package. Missing packages may be an evidence if a full distribution is not accessed, or if a package (real or virtual) has been dropped from the distribution. Usually they are referenced from Conflicts or Breaks statements.
- • Total distinct versions is the number of package versions found in the cache. If more than one distribution is being accessed (for instance, "stable" and "unstable"), this value can be considerably larger than the number of total package names.
- • Total dependencies is the number of dependency relationships claimed by all of the packages in the cache.
showsrc pkg...
- showsrc displays all the source package records that match the given package names. All versions are shown, as well as all records that declare the name to be a binary package. Use --only-source to display only source package names.
dump
- dump shows a short listing of every package in the cache. It is primarily for debugging.
dumpavail
- dumpavail prints out an available list to stdout. This is suitable for use with dpkg(1) and is used by the dselect(1) method.
unmet
- unmet displays a summary of all unmet dependencies in the package cache.
show pkg...
- show performs a function similar to dpkg --print-avail; it displays the package records for the named packages.
search regex...
-
search
performs a full text search on all available package lists for the POSIX regex pattern given, see
regex(7). It searches the package names and the descriptions for an occurrence of the regular expression and prints out the package name and the short description, including virtual package names. If
--full
is given then output identical to
show
is produced for each matched package, and if
--names-only
is given then the long description is not searched, only the package name and provided packages are.
Separate arguments can be used to specify multiple search patterns that are and'ed together.
depends pkg...
- depends shows a listing of each dependency a package has and all the possible other packages that can fulfill that dependency.
rdepends pkg...
- rdepends shows a listing of each reverse dependency a package has.
pkgnames [prefix]
-
This command prints the name of each package APT knows. The optional argument is a prefix match to filter the name list. The output is suitable for use in a shell tab complete function and the output is generated extremely quickly. This command is best used with the
--generate
option.
Note that a package which APT knows of is not necessarily available to download, installable or installed, e.g. virtual packages are also listed in the generated list.
dotty pkg...
-
dotty
takes a list of packages on the command line and generates output suitable for use by dotty from the
m[blue]GraphVizm[][1]
package. The result will be a set of nodes and edges representing the relationships between the packages. By default the given packages will trace out all dependent packages; this can produce a very large graph. To limit the output to only the packages listed on the command line, set the
APT::Cache::GivenOnly
option.
The resulting nodes will have several shapes; normal packages are boxes, pure virtual packages are triangles, mixed virtual packages are diamonds, missing packages are hexagons. Orange boxes mean recursion was stopped (leaf packages), blue lines are pre-depends, green lines are conflicts.
Caution, dotty cannot graph larger sets of packages.
xvcg pkg...
- The same as dotty, only for xvcg from the m[blue]VCG toolm[][2].
policy [pkg...]
- policy is meant to help debug issues relating to the preferences file. With no arguments it will print out the priorities of each source. Otherwise it prints out detailed information about the priority selection of the named package.
madison pkg...
- apt-cache's madison command attempts to mimic the output format and a subset of the functionality of the Debian archive management tool, madison. It displays available versions of a package in a tabular format. Unlike the original madison, it can only display information for the architecture for which APT has retrieved package lists (APT::Architecture).
OPTIONS
All command line options may be set using the configuration file, the descriptions indicate the configuration option to set. For boolean options you can override the config file by using something like -f-,--no-f, -f=no or several other variations.
-p, --pkg-cache
- Select the file to store the package cache. The package cache is the primary cache used by all operations. Configuration Item: Dir::Cache::pkgcache.
-s, --src-cache
- Select the file to store the source cache. The source is used only by gencaches and it stores a parsed version of the package information from remote sources. When building the package cache the source cache is used to avoid reparsing all of the package files. Configuration Item: Dir::Cache::srcpkgcache.
-q, --quiet
- Quiet; produces output suitable for logging, omitting progress indicators. More q's will produce more quietness up to a maximum of 2. You can also use -q=# to set the quietness level, overriding the configuration file. Configuration Item: quiet.
-i, --important
- Print only important dependencies; for use with unmet and depends. Causes only Depends and Pre-Depends relations to be printed. Configuration Item: APT::Cache::Important.
--no-pre-depends, --no-depends, --no-recommends, --no-suggests, --no-conflicts, --no-breaks, --no-replaces, --no-enhances
- Per default the depends and rdepends print all dependencies. This can be tweaked with these flags which will omit the specified dependency type. Configuration Item: APT::Cache::ShowDependencyType e.g. APT::Cache::ShowRecommends.
--implicit
- Per default depends and rdepends print only dependencies explicitly expressed in the metadata. With this flag it will also show dependencies implicitly added based on the encountered data. A Conflicts: foo e.g. expresses implicitly that this package also conflicts with the package foo from any other architecture. Configuration Item: APT::Cache::ShowImplicit.
-f, --full
- Print full package records when searching. Configuration Item: APT::Cache::ShowFull.
-a, --all-versions
- Print full records for all available versions. This is the default; to turn it off, use --no-all-versions. If --no-all-versions is specified, only the candidate version will be displayed (the one which would be selected for installation). This option is only applicable to the show command. Configuration Item: APT::Cache::AllVersions.
-g, --generate
- Perform automatic package cache regeneration, rather than use the cache as it is. This is the default; to turn it off, use --no-generate. Configuration Item: APT::Cache::Generate.
--names-only, -n
- Only search on the package and provided package names, not the long descriptions. Configuration Item: APT::Cache::NamesOnly.
--all-names
- Make pkgnames print all names, including virtual packages and missing dependencies. Configuration Item: APT::Cache::AllNames.
--recurse
- Make depends and rdepends recursive so that all packages mentioned are printed once. Configuration Item: APT::Cache::RecurseDepends.
--installed
- Limit the output of depends and rdepends to packages which are currently installed. Configuration Item: APT::Cache::Installed.
--with-source filename
-
Adds the given file as a source for metadata. Can be repeated to add multiple files. Supported are currently
*.deb,
*.dsc,
*.changes,
Sources
and
Packages
files as well as source package directories. Files are matched based on their name only, not their content!
Sources and Packages can be compressed in any format apt supports as long as they have the correct extension. If you need to store multiple of these files in one directory you can prefix a name of your choice with the last character being an underscore ("_"). Example: my.example_Packages.xz
Note that these sources are treated as trusted (see apt-secure(8)). Configuration Item: APT::Sources::With.
-h, --help
- Show a short usage summary.
-v, --version
- Show the program version.
-c, --config-file
- Configuration File; Specify a configuration file to use. The program will read the default configuration file and then this configuration file. If configuration settings need to be set before the default configuration files are parsed specify a file with the APT_CONFIG environment variable. See apt.conf(5) for syntax information.
-o, --option
- Set a Configuration Option; This will set an arbitrary configuration option. The syntax is -o Foo::Bar=bar. -o and --option can be used multiple times to set different options.
FILES
/etc/apt/sources.list
- Locations to fetch packages from. Configuration Item: Dir::Etc::SourceList.
/etc/apt/sources.list.d/
- File fragments for locations to fetch packages from. Configuration Item: Dir::Etc::SourceParts.
/var/lib/apt/lists/
- Storage area for state information for each package resource specified in sources.list(5) Configuration Item: Dir::State::Lists.
/var/lib/apt/lists/partial/
- Storage area for state information in transit. Configuration Item: Dir::State::Lists (partial will be implicitly appended)
SEE ALSO
apt.conf(5), sources.list(5), apt-get(8)
DIAGNOSTICS
apt-cache returns zero on normal operation, decimal 100 on error.
BUGS
m[blue]APT bug pagem[][3]. If you wish to report a bug in APT, please see /usr/share/doc/debian/bug-reporting.txt or the reportbug(1) command.
AUTHORS
Jason Gunthorpe
APT team
NOTES
- 1.
- GraphViz
- 2.
- VCG tool
- 3.
-
APT bug page
Index
This document was created by man2html, using the manual pages.
Time: 04:45:59 GMT, September 16, 2022
0 댓글