[MAN] strace

Content-type: text/html; charset=UTF-8

STRACE

Section: User Commands (1)
Updated: 2018-04-11
Index Return to Main Contents

---

 

NAME

strace - trace system calls and signals  

SYNOPSIS

[ -CdffhikqrtttTvVxxy ] [ -I n ] [ -b execve ] [-e expr]... [ -a column ] [ -o file ] [ -s strsize ] [-P path]... [-p pid]... { -p pid | [ -D ] [-E var[=val]]... [ -u username ] command [args] } -c [ -df ] [ -I n ] [ -b execve ] [-e expr]... [ -O overhead ] [ -S sortby ] [-P path]... [-p pid]... { -p pid | [ -D ] [-E var[=val]]... [ -u username ] command [args] }

 

DESCRIPTION

In the simplest case strace runs the specified command until it exits. It intercepts and records the system calls which are called by a process and the signals which are received by a process. The name of each system call, its arguments and its return value are printed on standard error or to the file specified with the -o option.

strace is a useful diagnostic, instructional, and debugging tool. System administrators, diagnosticians and trouble-shooters will find it invaluable for solving problems with programs for which the source is not readily available since they do not need to be recompiled in order to trace them. Students, hackers and the overly-curious will find that a great deal can be learned about a system and its system calls by tracing even ordinary programs. And programmers will find that since system calls and signals are events that happen at the user/kernel interface, a close examination of this boundary is very useful for bug isolation, sanity checking and attempting to capture race conditions.

Each line in the trace contains the system call name, followed by its arguments in parentheses and its return value. An example from stracing the command "cat /dev/null" is:

open("/dev/null", O_RDONLY) = 3

Errors (typically a return value of -1) have the errno symbol and error string appended.

open("/foo/bar", O_RDONLY) = -1 ENOENT (No such file or directory)

Signals are printed as signal symbol and decoded siginfo structure. An excerpt from stracing and interrupting the command "sleep 666" is:

sigsuspend([] <unfinished ...>
--- SIGINT {si_signo=SIGINT, si_code=SI_USER, si_pid=...} ---
+++ killed by SIGINT +++

If a system call is being executed and meanwhile another one is being called from a different thread/process then strace will try to preserve the order of those events and mark the ongoing call as being unfinished. When the call returns it will be marked as resumed.

[pid 28772] select(4, [3], NULL, NULL, NULL <unfinished ...>
[pid 28779] clock_gettime(CLOCK_REALTIME, {1130322148, 939977000}) = 0
[pid 28772] <... select resumed> )      = 1 (in [3])

Interruption of a (restartable) system call by a signal delivery is processed differently as kernel terminates the system call and also arranges its immediate reexecution after the signal handler completes.

read(0, 0x7ffff72cf5cf, 1)              = ? ERESTARTSYS (To be restarted)
--- SIGALRM ... ---
rt_sigreturn(0xe)                       = 0
read(0, "", 1)                          = 0

Arguments are printed in symbolic form with passion. This example shows the shell performing ">>xyzzy" output redirection:

open("xyzzy", O_WRONLY|O_APPEND|O_CREAT, 0666) = 3

Here, the third argument of open is decoded by breaking down the flag argument into its three bitwise-OR constituents and printing the mode value in octal by tradition. Where the traditional or native usage differs from ANSI or POSIX, the latter forms are preferred. In some cases, strace output is proven to be more readable than the source.

Structure pointers are dereferenced and the members are displayed as appropriate. In most cases, arguments are formatted in the most C-like fashion possible. For example, the essence of the command "ls -l /dev/null" is captured as:

lstat("/dev/null", {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 3), ...}) = 0

Notice how the 'struct stat' argument is dereferenced and how each member is displayed symbolically. In particular, observe how the st_mode member is carefully decoded into a bitwise-OR of symbolic and numeric values. Also notice in this example that the first argument to lstat is an input to the system call and the second argument is an output. Since output arguments are not modified if the system call fails, arguments may not always be dereferenced. For example, retrying the "ls -l" example with a non-existent file produces the following line:

lstat("/foo/bar", 0xb004) = -1 ENOENT (No such file or directory)

In this case the porch light is on but nobody is home.

Syscalls unknown to strace are printed raw, with the unknown system call number printed in hexadecimal form and prefixed with "syscall_":

syscall_0xbad(0xfedcba9876543210, 0xfedcba9876543211, 0xfedcba9876543212,
0xfedcba9876543213, 0xfedcba9876543214, 0xfedcba9876543215) = -1 (errno 38)

Character pointers are dereferenced and printed as C strings. Non-printing characters in strings are normally represented by ordinary C escape codes. Only the first strsize (32 by default) bytes of strings are printed; longer strings have an ellipsis appended following the closing quote. Here is a line from "ls -l" where the getpwuid library routine is reading the password file:

read(3, "root::0:0:System Administrator:/"..., 1024) = 422

While structures are annotated using curly braces, simple pointers and arrays are printed using square brackets with commas separating elements. Here is an example from the command "id" on a system with supplementary group ids:

getgroups(32, [100, 0]) = 2

On the other hand, bit-sets are also shown using square brackets but set elements are separated only by a space. Here is the shell, preparing to execute an external command:

sigprocmask(SIG_BLOCK, [CHLD TTOU], []) = 0

Here, the second argument is a bit-set of two signals, SIGCHLD and SIGTTOU. In some cases, the bit-set is so full that printing out the unset elements is more valuable. In that case, the bit-set is prefixed by a tilde like this:

sigprocmask(SIG_UNBLOCK, ~[], NULL) = 0

Here, the second argument represents the full set of all signals.  

OPTIONS

 

Output format

-a column

Align return values in a specific column (default column 40).

-i

Print the instruction pointer at the time of the system call.

-k

Print the execution stack trace of the traced processes after each system call (experimental). This option is available only if strace is built with libunwind.

-o filename

Write the trace output to the file filename rather than to stderr. filename.pid form is used if -ff option is supplied. If the argument begins with '|' or '!', the rest of the argument is treated as a command and all output is piped to it. This is convenient for piping the debugging output to a program without affecting the redirections of executed programs. The latter is not compatible with -ff option currently.

-q

Suppress messages about attaching, detaching etc. This happens automatically when output is redirected to a file and the command is run directly instead of attaching.

-qq

If given twice, suppress messages about process exit status.

-r

Print a relative timestamp upon entry to each system call. This records the time difference between the beginning of successive system calls.

-s strsize

Specify the maximum string size to print (the default is 32). Note that filenames are not considered strings and are always printed in full.

-t

Prefix each line of the trace with the wall clock time.

-tt

If given twice, the time printed will include the microseconds.

-ttt

If given thrice, the time printed will include the microseconds and the leading portion will be printed as the number of seconds since the epoch.

-T

Show the time spent in system calls. This records the time difference between the beginning and the end of each system call.

-x

Print all non-ASCII strings in hexadecimal string format.

-xx

Print all strings in hexadecimal string format.

-y

Print paths associated with file descriptor arguments.

-yy

Print protocol specific information associated with socket file descriptors.

 

Statistics

-c

Count time, calls, and errors for each system call and report a summary on program exit. This attempts to show system time (CPU time spent running in the kernel) independent of wall clock time. If -c is used with -f, only aggregate totals for all traced processes are kept.

-C

Like -c but also print regular output while processes are running.

-O overhead

Set the overhead for tracing system calls to overhead microseconds. This is useful for overriding the default heuristic for guessing how much time is spent in mere measuring when timing system calls using the -c option. The accuracy of the heuristic can be gauged by timing a given program run without tracing (using time(1)) and comparing the accumulated system call time to the total produced using -c.

-S sortby

Sort the output of the histogram printed by the -c option by the specified criterion. Legal values are time, calls, name, and nothing (default is time).

-w

Summarise the time difference between the beginning and end of each system call. The default is to summarise the system time.

 

Filtering

-e expr

A qualifying expression which modifies which events to trace or how to trace them. The format of the expression is:

[,qualifier/=][!][?],value1/[,[?],value2/]...

where qualifier is one of trace, abbrev, verbose, raw, signal, read, write, fault, or inject and value is a qualifier-dependent symbol or number. The default qualifier is trace. Using an exclamation mark negates the set of values. For example, -e open means literally -e trace=open which in turn means trace only the open system call. By contrast, -e trace=!open means to trace every system call except open. Question mark before the syscall qualification allows suppression of error in case no syscalls matched the qualification provided. In addition, the special values all and none have the obvious meanings.

Note that some shells use the exclamation point for history expansion even inside quoted arguments. If so, you must escape the exclamation point with a backslash.

-e trace=,set

Trace only the specified set of system calls. The -c option is useful for determining which system calls might be useful to trace. For example, trace=open,close,read,write means to only trace those four system calls. Be careful when making inferences about the user/kernel boundary if only a subset of system calls are being monitored. The default is trace=all.

-e trace=/,regex

Trace only those system calls that match the regex. You can use POSIX Extended Regular Expression syntax (see regex(7)).

-e trace=%file -e trace=file (deprecated) Trace all system calls which take a file name as an argument. You can think of this as an abbreviation for -e trace=open,stat,chmod,unlink,... which is useful to seeing what files the process is referencing. Furthermore, using the abbreviation will ensure that you don't accidentally forget to include a call like lstat in the list. Betchya woulda forgot that one.

-e trace=%process -e trace=process (deprecated) Trace all system calls which involve process management. This is useful for watching the fork, wait, and exec steps of a process.

-e trace=%network -e trace=network (deprecated) Trace all the network related system calls.

-e trace=%signal -e trace=signal (deprecated) Trace all signal related system calls.

-e trace=%ipc -e trace=ipc (deprecated) Trace all IPC related system calls.

-e trace=%desc -e trace=desc (deprecated) Trace all file descriptor related system calls.

-e trace=%memory -e trace=memory (deprecated) Trace all memory mapping related system calls.

-e trace=%stat

Trace stat syscall variants.

-e trace=%lstat

Trace lstat syscall variants.

-e trace=%fstat

Trace fstat and fstatat syscall variants.

-e trace=%%stat

Trace syscalls used for requesting file status (stat, lstat, fstat, fstatat, statx, and their variants).

-e trace=%statfs

Trace statfs, statfs64, statvfs, osf_statfs, and osf_statfs64 system calls. The same effect can be achieved with -e trace=/^(.*_)?statv?fs regular expression.

-e trace=%fstatfs

Trace fstatfs, fstatfs64, fstatvfs, osf_fstatfs, and osf_fstatfs64 system calls. The same effect can be achieved with -e trace=/fstatv?fs regular expression.

-e trace=%%statfs

Trace syscalls related to file system statistics (statfs-like, fstatfs-like, and ustat). The same effect can be achieved with -e trace=/statv?fs|fsstat|ustat regular expression.

-e trace=%pure

Trace syscalls that always succeed and have no arguments. Currently, this list includes arc_gettls(2), getdtablesize(2), getegid(2), getegid32(2), geteuid(2), geteuid32(2), getgid(2), getgid32(2), getpagesize(2), getpgrp(2), getpid(2), getppid(2), get_thread_area(2) (on architectures other than x86), gettid(2), get_tls(2), getuid(2), getuid32(2), getxgid(2), getxpid(2), getxuid(2), kern_features(2), and metag_get_tls(2) syscalls.

-e abbrev=,set

Abbreviate the output from printing each member of large structures. The default is abbrev=all. The -v option has the effect of abbrev=none.

-e verbose=,set

Dereference structures for the specified set of system calls. The default is verbose=all.

-e raw=,set

Print raw, undecoded arguments for the specified set of system calls. This option has the effect of causing all arguments to be printed in hexadecimal. This is mostly useful if you don't trust the decoding or you need to know the actual numeric value of an argument.

-e signal=,set

Trace only the specified subset of signals. The default is signal=all. For example, signal=!SIGIO (or signal=!io) causes SIGIO signals not to be traced.

-e read=,set

Perform a full hexadecimal and ASCII dump of all the data read from file descriptors listed in the specified set. For example, to see all input activity on file descriptors 3 and 5 use -e read=,3,5. Note that this is independent from the normal tracing of the read(2) system call which is controlled by the option -e trace=read.

-e write=,set

Perform a full hexadecimal and ASCII dump of all the data written to file descriptors listed in the specified set. For example, to see all output activity on file descriptors 3 and 5 use -e write=,3,,5. Note that this is independent from the normal tracing of the write(2) system call which is controlled by the option -e trace=write.

-e inject=,set/[:error=,errno/|:retval=,value/][:signal=,sig/][:when=,expr/]

Perform syscall tampering for the specified set of syscalls.

At least one of error, retval, or signal options has to be specified. error and retval are mutually exclusive.

If :error=,errno/ option is specified, a fault is injected into a syscall invocation: the syscall number is replaced by -1 which corresponds to an invalid syscall, and the error code is specified using a symbolic errno value like ENOSYS or a numeric value within 1..4095 range.

If :retval=,value/ option is specified, success injection is performed: the syscall number is replaced by -1, but a bogus success value is returned to the callee.

If :signal=,sig/ option is specified with either a symbolic value like SIGSEGV or a numeric value within 1..SIGRTMAX range, that signal is delivered on entering every syscall specified by the set.

If :signal=,sig/ option is specified without :error=,errno/ or :retval=,value/ options, then only a signal sig is delivered without a syscall fault injection. Conversely, :error=,errno/ or :retval=,value/ option without :signal=,sig/ option injects a fault without delivering a signal.

If both :error=,errno/ or :retval=,value/ and :signal=,sig/ options are specified, then both a fault or success is injected and a signal is delivered.

Unless a :when=,expr subexpression is specified, an injection is being made into every invocation of each syscall from the set.

The format of the subexpression is one of the following:

first

For every syscall from the set, perform an injection for the syscall invocation number first only.

first/+

For every syscall from the set, perform injections for the syscall invocation number first and all subsequent invocations.

first/+step

For every syscall from the set, perform injections for syscall invocations number first, first+step, first+step+step, and so on.

For example, to fail each third and subsequent chdir syscalls with ENOENT, use -e inject=,chdir/:error=,ENOENT/:when=,3/+.

The valid range for numbers first and step is 1..65535.

An injection expression can contain only one error= or retval= specification, and only one signal= specification. If an injection expression contains multiple when= specifications, the last one takes precedence.

Accounting of syscalls that are subject to injection is done per syscall and per tracee.

Specification of syscall injection can be combined with other syscall filtering options, for example, -P /dev/urandom -e inject=,file/:error=,ENOENT.

-e fault=,set/[:error=,errno/][:when=,expr/]

Perform syscall fault injection for the specified set of syscalls.

This is equivalent to more generic -e inject= expression with default value of errno option set to ENOSYS.

-P path

Trace only system calls accessing path. Multiple -P options can be used to specify several paths.

-v

Print unabbreviated versions of environment, stat, termios, etc. calls. These structures are very common in calls and so the default behavior displays a reasonable subset of structure members. Use this option to get all of the gory details.

 

Tracing

-b syscall

If specified syscall is reached, detach from traced process. Currently, only execve syscall is supported. This option is useful if you want to trace multi-threaded process and therefore require -f, but don't want to trace its (potentially very complex) children.

-D

Run tracer process as a detached grandchild, not as parent of the tracee. This reduces the visible effect of strace by keeping the tracee a direct child of the calling process.

-f

Trace child processes as they are created by currently traced processes as a result of the fork(2), vfork(2) and clone(2) system calls. Note that -p PID -f will attach all threads of process PID if it is multi-threaded, not only thread with thread_id = PID.

-ff

If the -o filename option is in effect, each processes trace is written to filename.pid where pid is the numeric process id of each process. This is incompatible with -c, since no per-process counts are kept.

One might want to consider using strace-log-merge(1) to obtain a combined strace log view.

-I interruptible

When strace can be interrupted by signals (such as pressing ^C). 1: no signals are blocked; 2: fatal signals are blocked while decoding syscall (default); 3: fatal signals are always blocked (default if '-o FILE PROG'); 4: fatal signals and SIGTSTP (^Z) are always blocked (useful to make strace -o FILE PROG not stop on ^Z).

 

Startup

-E var=,val

Run command with var=val in its list of environment variables.

-E var

Remove var from the inherited list of environment variables before passing it on to the command.

-p pid

Attach to the process with the process ID pid and begin tracing. The trace may be terminated at any time by a keyboard interrupt signal (CTRL-C). strace will respond by detaching itself from the traced process(es) leaving it (them) to continue running. Multiple -p options can be used to attach to many processes in addition to command (which is optional if at least one -p option is given). -p "`pidof PROG`" syntax is supported.

-u username

Run command with the user ID, group ID, and supplementary groups of username. This option is only useful when running as root and enables the correct execution of setuid and/or setgid binaries. Unless this option is used setuid and setgid programs are executed without effective privileges.

 

Miscellaneous

-d

Show some debugging output of strace itself on the standard error.

-F

This option is deprecated. It is retained for backward compatibility only and may be removed in future releases. Usage of multiple instances of -F option is still equivalent to a single -f, and it is ignored at all if used along with one or more instances of -f option.

-h

Print the help summary.

-V

Print the version number of strace.

 

DIAGNOSTICS

When command exits, strace exits with the same exit status. If command is terminated by a signal, strace terminates itself with the same signal, so that strace can be used as a wrapper process transparent to the invoking parent process. Note that parent-child relationship (signal stop notifications, getppid() value, etc) between traced process and its parent are not preserved unless -D is used.

When using -p without a command, the exit status of strace is zero unless no processes has been attached or there was an unexpected error in doing the tracing.  

SETUID INSTALLATION

If strace is installed setuid to root then the invoking user will be able to attach to and trace processes owned by any user. In addition setuid and setgid programs will be executed and traced with the correct effective privileges. Since only users trusted with full root privileges should be allowed to do these things, it only makes sense to install strace as setuid to root when the users who can execute it are restricted to those users who have this trust. For example, it makes sense to install a special version of strace with mode 'rwsr-xr--', user root and group trace, where members of the trace group are trusted users. If you do use this feature, please remember to install a regular non-setuid version of strace for ordinary users to use.  

MULTIPLE PERSONALITY SUPPORT

On some architectures, strace supports decoding of syscalls for processes that use different ABI rather than the one strace uses. Specifically, in addition to decoding native ABI, strace can decode the following ABIs on the following architectures:

Architecture	ABIs supported
x86_64	i386, x32 (when built as an x86_64 application); i386 (when built as an x32 application)
AArch64	ARM 32-bit EABI
PowerPC 64-bit	PowerPC 32-bit
RISC-V 64-bit	RISC-V 32-bit
s390x	s390
SPARC 64-bit	SPARC 32-bit
TILE 64-bit	TILE 32-bit

This support is optional and relies on ability to generate and parse structure definitions during the build time. Please refer to the output of the strace -V command in order to figure out what support is available in your strace build ("non-native" refers to an ABI that differs from the ABI strace has):

m32-mpers

strace can trace and properly decode non-native 32-bit binaries.

no-m32-mpers

strace can trace, but cannot properly decode non-native 32-bit binaries.

mx32-mpers

strace can trace and properly decode non-native 32-on-64-bit binaries.

no-mx32-mpers

strace can trace, but cannot properly decode non-native 32-on-64-bit binaries.

If the output contains neither m32-mpers nor no-m32-mpers, then decoding of non-native 32-bit binaries is not implemented at all or not applicable.

Likewise, if the output contains neither mx32-mpers nor no-mx32-mpers, then decoding of non-native 32-on-64-bit binaries is not implemented at all or not applicable.  

NOTES

It is a pity that so much tracing clutter is produced by systems employing shared libraries.

It is instructive to think about system call inputs and outputs as data-flow across the user/kernel boundary. Because user-space and kernel-space are separate and address-protected, it is sometimes possible to make deductive inferences about process behavior using inputs and outputs as propositions.

In some cases, a system call will differ from the documented behavior or have a different name. For example, the faccessat(2) system call does not have flags argument, and the setrlimit(2) library function uses prlimit64(2) system call on modern (2.6.38+) kernels. These discrepancies are normal but idiosyncratic characteristics of the system call interface and are accounted for by C library wrapper functions.

Some system calls have different names in different architectures and personalities. In these cases, system call filtering and printing uses the names that match corresponding __NR_* kernel macros of the tracee's architecture and personality. There are two exceptions from this general rule: arm_fadvise64_64(2) ARM syscall and xtensa_fadvise64_64(2) Xtensa syscall are filtered and printed as fadvise64_64(2).

On some platforms a process that is attached to with the -p option may observe a spurious EINTR return from the current system call that is not restartable. (Ideally, all system calls should be restarted on strace attach, making the attach invisible to the traced process, but a few system calls aren't. Arguably, every instance of such behavior is a kernel bug.) This may have an unpredictable effect on the process if the process takes no action to restart the system call.  

BUGS

Programs that use the setuid bit do not have effective user ID privileges while being traced.

A traced process runs slowly.

Traced processes which are descended from command may be left running after an interrupt signal (CTRL-C).  

HISTORY

The original strace was written by Paul Kranenburg for SunOS and was inspired by its trace utility. The SunOS version of strace was ported to Linux and enhanced by Branko Lankester, who also wrote the Linux kernel support. Even though Paul released strace 2.5 in 1992, Branko's work was based on Paul's strace 1.5 release from 1991. In 1993, Rick Sladkey merged strace 2.5 for SunOS and the second release of strace for Linux, added many of the features of truss(1) from SVR4, and produced an strace that worked on both platforms. In 1994 Rick ported strace to SVR4 and Solaris and wrote the automatic configuration support. In 1995 he ported strace to Irix and tired of writing about himself in the third person.

Beginning with 1996, strace was maintained by Wichert Akkerman. During his tenure, strace development migrated to CVS; ports to FreeBSD and many architectures on Linux (including ARM, IA-64, MIPS, PA-RISC, PowerPC, s390, SPARC) were introduced. In 2002, the burden of strace maintainership was transferred to Ronald McGrath. Since then, strace gained support for several new Linux architectures (AMD64, s390x, SuperH), bi-architecture support for some of them, and received numerous additions and improvements in syscalls decoders on Linux; strace development migrated to git during that period. Since 2009, strace is actively maintained by Dmitry Levin. strace gained support for AArch64, ARC, AVR32, Blackfin, Meta, Nios II, OpenSISC 1000, RISC-V, Tile/TileGx, Xtensa architectures since that time. In 2012, unmaintained and apparently broken support for non-Linux operating systems was removed. Also, in 2012 strace gained support for path tracing and file descriptor path decoding. In 2014, support for stack traces printing was added. In 2016, syscall fault injection was implemented.

For the additional information, please refer to the NEWS file and strace repository commit log.  

REPORTING BUGS

Problems with strace should be reported to the strace mailing list at <strace-devel@lists.sourceforge.net>.  

SEE ALSO

strace-log-merge(1), ltrace(1), perf-trace(1), trace-cmd(1), time(1), ptrace(2), proc(5)

---

 

Index

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

Output format

Statistics

Filtering

Tracing

Startup

Miscellaneous

DIAGNOSTICS

SETUID INSTALLATION

MULTIPLE PERSONALITY SUPPORT

NOTES

BUGS

HISTORY

REPORTING BUGS

SEE ALSO

---

This document was created by man2html, using the manual pages.
Time: 04:45:24 GMT, September 16, 2022