Header Ads Widget

[MAN] stat

Content-type: text/html; charset=UTF-8 Man page of STAT

STAT

Section: User Commands (1)
Updated: January 2018
Index Return to Main Contents
 

NAME

stat - display file or file system status  

SYNOPSIS

stat [,OPTION/]... ,FILE/...  

DESCRIPTION

Display file or file system status.

Mandatory arguments to long options are mandatory for short options too.

-L, --dereference
follow links
-f, --file-system
display file system status instead of file status
-c --format=,FORMAT/
use the specified FORMAT instead of the default; output a newline after each use of FORMAT
--printf=,FORMAT/
like --format, but interpret backslash escapes, and do not output a mandatory trailing newline; if you want a newline, include \n in FORMAT
-t, --terse
print the information in terse form
--help
display this help and exit
--version
output version information and exit

The valid format sequences for files (without --file-system):

%a
access rights in octal (note '#' and '0' printf flags)
%A
access rights in human readable form
%b
number of blocks allocated (see %B)
%B
the size in bytes of each block reported by %b
%C
SELinux security context string
%d
device number in decimal
%D
device number in hex
%f
raw mode in hex
%F
file type
%g
group ID of owner
%G
group name of owner
%h
number of hard links
%i
inode number
%m
mount point
%n
file name
%N
quoted file name with dereference if symbolic link
%o
optimal I/O transfer size hint
%s
total size, in bytes
%t
major device type in hex, for character/block device special files
%T
minor device type in hex, for character/block device special files
%u
user ID of owner
%U
user name of owner
%w
time of file birth, human-readable; - if unknown
%W
time of file birth, seconds since Epoch; 0 if unknown
%x
time of last access, human-readable
%X
time of last access, seconds since Epoch
%y
time of last data modification, human-readable
%Y
time of last data modification, seconds since Epoch
%z
time of last status change, human-readable
%Z
time of last status change, seconds since Epoch

Valid format sequences for file systems:

%a
free blocks available to non-superuser
%b
total data blocks in file system
%c
total file nodes in file system
%d
free file nodes in file system
%f
free blocks in file system
%i
file system ID in hex
%l
maximum length of filenames
%n
file name
%s
block size (for faster transfers)
%S
fundamental block size (for block counts)
%t
file system type in hex
%T
file system type in human readable form

NOTE: your shell may have its own version of stat, which usually supersedes the version described here. Please refer to your shell's documentation for details about the options it supports.  

AUTHOR

Written by Michael Meskes.  

REPORTING BUGS

GNU coreutils online help: <http://www.gnu.org/software/coreutils/>
Report stat translation bugs to <http://translationproject.org/team/>  

COPYRIGHT

Copyright © 2017 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.  

SEE ALSO

stat(2)


Full documentation at: <http://www.gnu.org/software/coreutils/stat>
or available locally via: info '(coreutils) stat invocation'


 

Index

NAME
SYNOPSIS
DESCRIPTION
AUTHOR
REPORTING BUGS
COPYRIGHT
SEE ALSO

This document was created by man2html, using the manual pages.
Time: 04:45:24 GMT, September 16, 2022 Content-type: text/html; charset=UTF-8 Man page of STAT

STAT

Section: Linux Programmer's Manual (2)
Updated: 2017-09-15
Index Return to Main Contents
 

NAME

stat, fstat, lstat, fstatat - get file status  

SYNOPSIS

#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>

int stat(const char *pathname, struct stat *statbuf);
int fstat(int fd, struct stat *statbuf);
int lstat(const char *pathname, struct stat *statbuf);

#include <fcntl.h>           /* Definition of AT_* constants */
#include <sys/stat.h>

int fstatat(int dirfd, const char *pathname, struct stat *statbuf,
            int flags);

Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

lstat():

/* glibc 2.19 and earlier */ _BSD_SOURCE

    || /* Since glibc 2.20 */ _DEFAULT_SOURCE

    || _XOPEN_SOURCE >= 500

    || /* Since glibc 2.10: */ _POSIX_C_SOURCE >= 200112L

fstatat():

Since glibc 2.10:
_POSIX_C_SOURCE >= 200809L
Before glibc 2.10:
_ATFILE_SOURCE
 

DESCRIPTION

These functions return information about a file, in the buffer pointed to by statbuf. No permissions are required on the file itself, but---in the case of stat(), fstatat(), and lstat()---execute (search) permission is required on all of the directories in pathname that lead to the file.

stat() and fstatat() retrieve information about the file pointed to by pathname; the differences for fstatat() are described below.

lstat() is identical to stat(), except that if pathname is a symbolic link, then it returns information about the link itself, not the file that it refers to.

fstat() is identical to stat(), except that the file about which information is to be retrieved is specified by the file descriptor fd.  

The stat structure

All of these system calls return a stat structure, which contains the following fields:

struct stat {
    dev_t     st_dev;         /* ID of device containing file */
    ino_t     st_ino;         /* Inode number */
    mode_t    st_mode;        /* File type and mode */
    nlink_t   st_nlink;       /* Number of hard links */
    uid_t     st_uid;         /* User ID of owner */
    gid_t     st_gid;         /* Group ID of owner */
    dev_t     st_rdev;        /* Device ID (if special file) */
    off_t     st_size;        /* Total size, in bytes */
    blksize_t st_blksize;     /* Block size for filesystem I/O */
    blkcnt_t  st_blocks;      /* Number of 512B blocks allocated */


    /* Since Linux 2.6, the kernel supports nanosecond
       precision for the following timestamp fields.
       For the details before Linux 2.6, see NOTES. */


    struct timespec st_atim;  /* Time of last access */
    struct timespec st_mtim;  /* Time of last modification */
    struct timespec st_ctim;  /* Time of last status change */

#define st_atime st_atim.tv_sec /* Backward compatibility */ #define st_mtime st_mtim.tv_sec #define st_ctime st_ctim.tv_sec };

Note: the order of fields in the stat structure varies somewhat across architectures. In addition, the definition above does not show the padding bytes that may be present between some fields on various architectures. Consult the glibc and kernel source code if you need to know the details.

Note: for performance and simplicity reasons, different fields in the stat structure may contain state information from different moments during the execution of the system call. For example, if st_mode or st_uid is changed by another process by calling chmod(2) or chown(2), stat() might return the old st_mode together with the new st_uid, or the old st_uid together with the new st_mode.

The fields in the stat structure are as follows:

st_dev
This field describes the device on which this file resides. (The major(3) and minor(3) macros may be useful to decompose the device ID in this field.)
st_ino
This field contains the file's inode number.
st_mode
This field contains the file type and mode. See inode(7) for further information.
st_nlink
This field contains the number of hard links to the file.
st_uid
This field contains the user ID of the owner of the file.
st_gid
This field contains the ID of the group owner of the file.
st_rdev
This field describes the device that this file (inode) represents.
st_size
This field gives the size of the file (if it is a regular file or a symbolic link) in bytes. The size of a symbolic link is the length of the pathname it contains, without a terminating null byte.
st_blksize
This field gives the "preferred" block size for efficient filesystem I/O.
st_blocks
This field indicates the number of blocks allocated to the file, in 512-byte units. (This may be smaller than st_size/512 when the file has holes.)
st_atime
This is the file's last access timestamp.
st_mtime
This is the file's last modification timestamp.
st_ctime
This is the file's last status change timestamp.

For further information on the above fields, see inode(7).  

fstatat()

The fstatat() system call is a more general interface for accessing file information which can still provide exactly the behavior of each of stat(), lstat(), and fstat().

If the pathname given in pathname is relative, then it is interpreted relative to the directory referred to by the file descriptor dirfd (rather than relative to the current working directory of the calling process, as is done by stat() and lstat() for a relative pathname).

If pathname is relative and dirfd is the special value AT_FDCWD, then pathname is interpreted relative to the current working directory of the calling process (like stat() and lstat()).

If pathname is absolute, then dirfd is ignored.

flags can either be 0, or include one or more of the following flags ORed:

AT_EMPTY_PATH (since Linux 2.6.39)
If pathname is an empty string, operate on the file referred to by dirfd (which may have been obtained using the open(2) O_PATH flag). In this case, dirfd can refer to any type of file, not just a directory, and the behavior of fstatat() is similar to that of fstat(). If dirfd is AT_FDCWD, the call operates on the current working directory. This flag is Linux-specific; define _GNU_SOURCE to obtain its definition.
AT_NO_AUTOMOUNT (since Linux 2.6.38)
Don't automount the terminal ("basename") component of pathname if it is a directory that is an automount point. This allows the caller to gather attributes of an automount point (rather than the location it would mount). Since Linux 4.14, also don't instantiate a nonexistent name in an on-demand directory such as used for automounter indirect maps. This flag can be used in tools that scan directories to prevent mass-automounting of a directory of automount points. The AT_NO_AUTOMOUNT flag has no effect if the mount point has already been mounted over. This flag is Linux-specific; define _GNU_SOURCE to obtain its definition. Both stat() and lstat() act as though AT_NO_AUTOMOUNT was set.
AT_SYMLINK_NOFOLLOW
If pathname is a symbolic link, do not dereference it: instead return information about the link itself, like lstat(). (By default, fstatat() dereferences symbolic links, like stat().)

See openat(2) for an explanation of the need for fstatat().  

RETURN VALUE

On success, zero is returned. On error, -1 is returned, and errno is set appropriately.  

ERRORS

EACCES
Search permission is denied for one of the directories in the path prefix of pathname. (See also path_resolution(7).)
EBADF
fd is not a valid open file descriptor.
EFAULT
Bad address.
ELOOP
Too many symbolic links encountered while traversing the path.
ENAMETOOLONG
pathname is too long.
ENOENT
A component of pathname does not exist, or pathname is an empty string and AT_EMPTY_PATH was not specified in flags.
ENOMEM
Out of memory (i.e., kernel memory).
ENOTDIR
A component of the path prefix of pathname is not a directory.
EOVERFLOW
pathname or fd refers to a file whose size, inode number, or number of blocks cannot be represented in, respectively, the types off_t, ino_t, or blkcnt_t. This error can occur when, for example, an application compiled on a 32-bit platform without -D_FILE_OFFSET_BITS=64 calls stat() on a file whose size exceeds (1<<31)-1 bytes.

The following additional errors can occur for fstatat():

EBADF
dirfd is not a valid file descriptor.
EINVAL
Invalid flag specified in flags.
ENOTDIR
pathname is relative and dirfd is a file descriptor referring to a file other than a directory.
 

VERSIONS

fstatat() was added to Linux in kernel 2.6.16; library support was added to glibc in version 2.4.  

CONFORMING TO

stat(), fstat(), lstat(): SVr4, 4.3BSD, POSIX.1-2001, POSIX.1.2008.

fstatat(): POSIX.1-2008.

According to POSIX.1-2001, lstat() on a symbolic link need return valid information only in the st_size field and the file type of the st_mode field of the stat structure. POSIX.1-2008 tightens the specification, requiring lstat() to return valid information in all fields except the mode bits in st_mode.

Use of the st_blocks and st_blksize fields may be less portable. (They were introduced in BSD. The interpretation differs between systems, and possibly on a single system when NFS mounts are involved.)  

NOTES

 

Timestamp fields

Older kernels and older standards did not support nanosecond timestamp fields. Instead, there were three timestamp fields---st_atime, st_mtime, and st_ctime---typed as time_t that recorded timestamps with one-second precision.

Since kernel 2.5.48, the stat structure supports nanosecond resolution for the three file timestamp fields. The nanosecond components of each timestamp are available via names of the form st_atim.tv_nsec, if suitable feature test macros are defined. Nanosecond timestamps were standardized in POSIX.1-2008, and, starting with version 2.12, glibc exposes the nanosecond component names if _POSIX_C_SOURCE is defined with the value 200809L or greater, or _XOPEN_SOURCE is defined with the value 700 or greater. Up to and including glibc 2.19, the definitions of the nanoseconds components are also defined if _BSD_SOURCE or _SVID_SOURCE is defined. If none of the aforementioned macros are defined, then the nanosecond values are exposed with names of the form st_atimensec.  

C library/kernel differences

Over time, increases in the size of the stat structure have led to three successive versions of stat(): sys_stat() (slot __NR_oldstat), sys_newstat() (slot __NR_stat), and sys_stat64() (slot __NR_stat64) on 32-bit platforms such as i386. The first two versions were already present in Linux 1.0 (albeit with different names); the last was added in Linux 2.4. Similar remarks apply for fstat() and lstat().

The kernel-internal versions of the stat structure dealt with by the different versions are, respectively:

__old_kernel_stat
The original structure, with rather narrow fields, and no padding.
stat
Larger st_ino field and padding added to various parts of the structure to allow for future expansion.
stat64
Even larger st_ino field, larger st_uid and st_gid fields to accommodate the Linux-2.4 expansion of UIDs and GIDs to 32 bits, and various other enlarged fields and further padding in the structure. (Various padding bytes were eventually consumed in Linux 2.6, with the advent of 32-bit device IDs and nanosecond components for the timestamp fields.)

The glibc stat() wrapper function hides these details from applications, invoking the most recent version of the system call provided by the kernel, and repacking the returned information if required for old binaries.

On modern 64-bit systems, life is simpler: there is a single stat() system call and the kernel deals with a stat structure that contains fields of a sufficient size.

The underlying system call employed by the glibc fstatat() wrapper function is actually called fstatat64() or, on some architectures, newfstatat().  

EXAMPLE

The following program calls lstat() and displays selected fields in the returned stat structure.

#include <sys/types.h> #include <sys/stat.h> #include <time.h> #include <stdio.h> #include <stdlib.h> #include <sys/sysmacros.h>

int main(int argc, char *argv[]) {
    struct stat sb;


    if (argc != 2) {
        fprintf(stderr, "Usage: %s <pathname>\n", argv[0]);
        exit(EXIT_FAILURE);
    }


    if (lstat(argv[1], &sb) == -1) {
        perror("lstat");
        exit(EXIT_FAILURE);
    }


    printf("ID of containing device:  [%lx,%lx]\n",          (long) major(sb.st_dev), (long) minor(sb.st_dev));


    printf("File type:                ");


    switch (sb.st_mode & S_IFMT) {
    case S_IFBLK:  printf("block device\n");            break;
    case S_IFCHR:  printf("character device\n");        break;
    case S_IFDIR:  printf("directory\n");               break;
    case S_IFIFO:  printf("FIFO/pipe\n");               break;
    case S_IFLNK:  printf("symlink\n");                 break;
    case S_IFREG:  printf("regular file\n");            break;
    case S_IFSOCK: printf("socket\n");                  break;
    default:       printf("unknown?\n");                break;
    }


    printf("I-node number:            %ld\n", (long) sb.st_ino);


    printf("Mode:                     %lo (octal)\n",
            (unsigned long) sb.st_mode);


    printf("Link count:               %ld\n", (long) sb.st_nlink);
    printf("Ownership:                UID=%ld   GID=%ld\n",
            (long) sb.st_uid, (long) sb.st_gid);


    printf("Preferred I/O block size: %ld bytes\n",
            (long) sb.st_blksize);
    printf("File size:                %lld bytes\n",
            (long long) sb.st_size);
    printf("Blocks allocated:         %lld\n",
            (long long) sb.st_blocks);


    printf("Last status change:       %s", ctime(&sb.st_ctime));
    printf("Last file access:         %s", ctime(&sb.st_atime));
    printf("Last file modification:   %s", ctime(&sb.st_mtime));


    exit(EXIT_SUCCESS); }  

SEE ALSO

ls(1), stat(1), access(2), chmod(2), chown(2), readlink(2), utime(2), capabilities(7), inode(7), symlink(7)  

COLOPHON

This page is part of release 4.15 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.


 

Index

NAME
SYNOPSIS
DESCRIPTION
The stat structure
fstatat()
RETURN VALUE
ERRORS
VERSIONS
CONFORMING TO
NOTES
Timestamp fields
C library/kernel differences
EXAMPLE
SEE ALSO
COLOPHON

This document was created by man2html, using the manual pages.
Time: 04:45:34 GMT, September 16, 2022

댓글 쓰기

0 댓글