BCCMD
Section: Linux System Administration (1)Updated: Jun 20 2006
Index Return to Main Contents
NAME
bccmd - Utility for the CSR BCCMD interfaceSYNOPSIS
bccmdbccmd [-t <transport>] [-d <device>] <command> [<args>]
bccmd [-h --help]
DESCRIPTION
bccmd issues BlueCore commands to Cambridge Silicon Radio devices. If run without the <command> argument, a short help page will be displayed.OPTIONS
- -t <transport>
-
Specify the communication transport. Valid options are:
-
- HCI
- Local device with Host Controller Interface (default).
- USB
- Direct USB connection.
- BCSP
- Blue Core Serial Protocol.
- H4
- H4 serial protocol.
- 3WIRE
- 3WIRE protocol (not implemented).
-
-d <dev>
Specify a particular device to operate on. If not specified, default is the first available HCI device
or /dev/ttyS0 for serial transports.
COMMANDS
- builddef
- Get build definitions
- keylen <handle>
- Get current crypt key length
- clock
- Get local Bluetooth clock
- rand
- Get random number
- chiprev
- Get chip revision
- buildname
- Get the full build name
- panicarg
- Get panic code argument
- faultarg
- Get fault code argument
- coldreset
- Perform cold reset
- warmreset
- Perform warm reset
- disabletx
- Disable TX on the device
- enabletx
- Enable TX on the device
- singlechan <channel>
- Lock radio on specific channel
- hoppingon
- Revert to channel hopping
- rttxdata1 <decimal freq MHz> <level>
- TXData1 radio test
- radiotest <decimal freq MHz> <level> <id>
- Run radio tests, tests 4, 6 and 7 are transmit tests
- memtypes
- Get memory types
- psget [-r] [-s <stores>] <key>
- Get value for PS key. -r sends a warm reset afterwards
- psset [-r] [-s <stores>] <key> <value>
- Set value for PS key. -r sends a warm reset afterwards
- psclr [-r] [-s <stores>] <key>
- Clear value for PS key. -r sends a warm reset afterwards
- pslist [-r] [-s <stores>]
- List all PS keys. -r sends a warm reset afterwards
- psread [-r] [-s <stores>]
- Read all PS keys. -r sends a warm reset afterwards
- psload [-r] [-s <stores>] <file>
- Load all PS keys from PSR file. -r sends a warm reset afterwards
- pscheck [-r] [-s <stores>] <file>
- Check syntax of PSR file. -r sends a warm reset afterwards
KEYS
bdaddr country devclass keymin keymax features commands version remver hciextn mapsco baudrate hostintf anafreq anaftrim usbvid usbpid dfupid bootmodeAUTHORS
Written by Marcel Holtmann <marcel@holtmann.org>, man page by Adam Laurie <adam@algroup.co.uk>
Index
This document was created by man2html, using the manual pages.
Time: 04:45:23 GMT, September 16, 2022
0 댓글